Your complete Pennsylvania study guide — plain language, no jargon.

📘 Prefer pictures? Flip through the visual deck

This whole guide as 13 slides — swipe or scroll sideways through them. Every sign, signal and marking in the Pennsylvania guide.

Pennsylvania Signs & Signals visual deck — slide 1 of 13
Pennsylvania Signs & Signals visual deck — slide 2 of 13
Pennsylvania Signs & Signals visual deck — slide 3 of 13
Pennsylvania Signs & Signals visual deck — slide 4 of 13
Pennsylvania Signs & Signals visual deck — slide 5 of 13
Pennsylvania Signs & Signals visual deck — slide 6 of 13
Pennsylvania Signs & Signals visual deck — slide 7 of 13
Pennsylvania Signs & Signals visual deck — slide 8 of 13
Pennsylvania Signs & Signals visual deck — slide 9 of 13
Pennsylvania Signs & Signals visual deck — slide 10 of 13
Pennsylvania Signs & Signals visual deck — slide 11 of 13
Pennsylvania Signs & Signals visual deck — slide 12 of 13
Pennsylvania Signs & Signals visual deck — slide 13 of 13

Take it with you: Download the deck as a PDF (2.9 MB) → — free to share.

Built from the official manual. Every fact in this guide comes from the Pennsylvania Driver’s Manual (PUB 95), published by the Pennsylvania Department of Transportation (PennDOT), from pa.gov, and from Pennsylvania law — checked against the current sources and verified November 12, 2026. Read the official manual at pa.gov

Why this matters

Signs, signals, and road markings are the language of the road. They warn you about what’s coming, tell you the rules where you’re driving, and guide you to where you’re going. The real PennDOT knowledge test is short and unforgiving: 18 questions, and you must answer 15 correctly to pass. It measures your knowledge of traffic signs, Pennsylvania driving laws, and safe driving practices — so reading this language fluently is not optional. Learn the code of colors and shapes and you won’t just pass — you’ll read every Pennsylvania road faster for the rest of your driving life.

Part 1: The master key — colors and shapes

You don’t need to memorize hundreds of individual signs. Pennsylvania’s manual sorts signs into three basic categories — regulatory, warning, and guide — and builds them from a code of colors and shapes. Learn the code, and you can read almost any sign at a glance, even one you’ve never seen before.

Shapes tell you the job of the sign:

Colors tell you the type of message:

Memory aid: Octagon stops you. Triangle yields. Diamond warns you. Pentagon means school. Orange means workers.

Check yourself: You’re driving at dusk and see a yellow diamond with a black arrow curving right. Without reading this guide again — what is it telling you, and what should you do?

Part 2: Regulatory signs — the law on a stick

Regulatory signs tell you what you must or must not do. In Pennsylvania, ignoring one doesn’t just risk a fine — Pennsylvania has a points system, and many violations add points to your record: PennDOT begins corrective action at 6 points, and suspension is mandatory at 11 or more.

Stop sign. Come to a complete stop — slowing without fully stopping is illegal — before your vehicle reaches the crosswalk or stop line. View blocked? Yield to pedestrians, then pull forward until you can see.

Yield sign. Slow down, check for traffic, and give the right-of-way to pedestrians and approaching cross traffic. Stop only when necessary — then proceed only when there’s a sufficient gap that doesn’t interfere with the normal flow of traffic.

Four-way stop plaque. When a FOUR-WAY STOP plaque hangs below a stop sign, traffic from all four directions must stop. The first vehicle to reach the intersection moves first. If two vehicles arrive at the same time, the driver on the left yields to the driver on the right. Vehicles facing one another may both proceed, with caution.

Speed limit signs. The number is the maximum legal speed under ideal conditions for that stretch of road — not a target. Rain, fog, or traffic can make the posted number too fast, and you can be ticketed for driving too fast for conditions even under the limit.

Divided highway sign. The road you’re on is about to intersect a divided highway — two one-way roadways separated by a median or a guide rail. At the first roadway you can only turn right; at the second, only left.

Check yourself: A friend who moved from a no-points state shrugs off a stop-sign ticket: “It’s just a fine.” In Pennsylvania, what’s the fuller picture?

Part 3: Warning signs — hazard ahead

Warning signs are almost always yellow diamonds with black symbols or words. They don’t give orders; they give you a heads-up so you can adjust early and smoothly. An advisory speed sign may appear with any diamond-shaped warning sign — the manual’s example shows a sharp left curve ahead where the highest safe speed is 25 mph.

Common ones to know:

Work zone signs break the yellow rule: orange diamonds with black lettering. Turn on your headlights through a work zone at any hour — the law applies to all posted work zones, and a stop in one with headlights off adds a $25 fine.

Check yourself: An orange diamond says “Road Work Ahead.” What color would this sign be if it were a permanent warning instead? What should you switch on as you enter the work zone, day or night?

Part 4: Traffic signals — more than red, yellow, green

Position backs up color: on a vertical signal, red is on top and green on the bottom; on a horizontal signal, red is on the left and green on the right.

Steady red — stop before the marked stop line or crosswalk; if there are no lines, stop before entering the intersection, and wait for green. Two turns on red are legal in Pennsylvania unless a sign prohibits them: a right turn on red after stopping and yielding to pedestrians and other traffic, and a left turn on red only from the left lane, turning left from a one-way street onto another one-way street, after stopping and yielding.

Steady yellow — a steady red light will soon appear. Slow down and prepare to stop. If you’re already within the intersection or cannot stop safely, continue through carefully.

Steady green — you may drive through if the road is clear, and turn right or left unless a sign prohibits it. When turning, yield to other vehicles and pedestrians within the intersection.

Arrows. A steady red arrow means stop — no turning in the arrow’s direction (the turns on red allowed at a steady red light are allowed here too). A steady yellow arrow means the movement is ending. A steady green arrow gives a protected turn — oncoming traffic is held by red. A flashing yellow arrow permits a cautious turn after yielding — not protected, because oncoming traffic has green.

Flashing red light — the same meaning as a STOP sign: complete stop, look both ways, proceed only after the intersection is clear. Flashing yellow light — caution: slow down, look, and proceed with care.

A dark signal is a stop. If a traffic signal isn’t functioning, treat the intersection as a four-way stop.

Lane-use signals hang over reversible lanes: a green downward arrow means you may use the lane; a steady yellow X means you must change lanes because the lane’s direction is about to be reversed; a steady red X means you are not allowed to use the lane at all.

Ramp-metering signals alternate green and red at some highway entrance ramps. Wait for green — on a single-lane ramp, only one car may enter per green — and still look for a safe gap: the green doesn’t protect your entry.

Pedestrian signals. WALK means start crossing, alert for turning vehicles. A flashing DON’T WALK means finish crossing if you’re in the street, but don’t start from the curb. A steady DON’T WALK means do not cross. Near a blind pedestrian with a white cane or guide dog, slow down, always yield, and be prepared to stop.

Check yourself: A storm knocks out the traffic light at a busy intersection. The light is completely dark. What do you do?

Part 5: Pavement markings — paint with meaning

Yellow lines divide traffic traveling in opposite directions, and also mark the left edge of divided highways, one-way streets, and ramps. White lines divide lanes traveling the same direction and mark the right edge of the road.

Check yourself: You need to turn left into a driveway across double solid yellow lines. Is that the same violation as crossing them to pass a slow car? What’s the difference?

Part 6: Pennsylvania numbers hiding in the signs topic

Some test questions dressed as “signs and signals” are really Pennsylvania speed and signal rules. Know these cold:

Key numbers to memorize

Fact Remember
Sign categories 3 — regulatory, warning, guide
Stop sign shape Octagon (8 sides) — the only one
Yield sign shape Triangle (3 sides)
Warning sign color/shape Yellow diamond (orange diamond = work zone)
No-passing zone sign Pennant — the only pennant-shaped warning sign
School sign Pentagon — the only pentagon-shaped sign on the roadway
Crossbuck At the tracks themselves — treat it as a yield
Dark traffic signal Treat as a four-way stop
Real PennDOT knowledge test 18 questions — 15 correct to pass
School-zone speed 15 mph when lights flash or during posted times
Maximum speed in Pennsylvania 70 mph
Unposted defaults: urban / residence district / other 35 / 25 / 55 mph
School bus stop distance At least 10 feet away
Points: corrective action / mandatory suspension 6 points / 11 or more points

5-question self-check

  1. You see a yellow diamond sign with a car and wavy lines behind it. What does it mean, and what should you do?
  2. The traffic light at your intersection is completely dark after a power failure. What do you do?
  3. A traffic light shows a flashing yellow arrow for your left turn. Is your turn protected? What must you do before turning?
  4. You’re driving past a school and the yellow lights on the school zone sign are flashing. What speed applies?
  5. No speed limit sign is posted. What’s the maximum legal speed in an urban district — and in a residence district?

Answer key

  1. Slippery when wet — especially slippery conditions exist when wet. Reduce your speed, increase your following distance, do not accelerate or brake quickly, and make turns at a very slow speed.
  2. Treat the intersection as a four-way stop. Stop completely, then proceed in turn when it’s safe.
  3. No — a flashing yellow arrow turn is not protected, because oncoming traffic has a green light. Yield to oncoming traffic and pedestrians, then turn with caution.
  4. 15 mph — the school-zone limit applies when the lights are flashing (or during the time periods shown on the sign). Exceeding it brings 3 points and a fine.
  5. 35 mph in an urban district, and 25 mph in a residence district. (Elsewhere, the unposted default is 55 mph, and Pennsylvania’s maximum is 70 mph.)

Keep practicing

More study guides: Traffic Laws Study Guide · Right of Way Study Guide · Safe Driving Study Guide · Alcohol, Drugs & Driving Conditions Study Guide · Licensing & Registration Study Guide